iRobot Scooba 350 Product Manual - Page 24

 4 Priming Scooba's Pump- Scooba's powerful cleaning system includes a pump that distributes cleaning solution from the tank onto your floor. To prime Scooba's pump, fit the end of the included suction bulb over Scooba's solution valve. Push air through Scooba's pump system 3 or 4 times. Solution Valve General Troubleshooting Problem Scooba will not start cleaning Likely Cause Power is off Battery is not charged Battery is not correctly seated Excessive foam coming out of Scooba There is too much cleaning solution concentrate in Clean tank Cleaning head sticks out of Scooba, will not engage Cleaning head is not closed tightly over the brush What To Do Press Power, then press Clean to start Scooba. Charge Scooba's battery. (page 11) Remove battery and ensure that battery tabs are placed inside Scooba's guide holes before closing Scooba's tank. Empty and rinse the Clean tank thoroughly. When re-filling, make sure to use only 1.5 ounces of Scooba cleaning solution and to fill the Clean tank completely to the rim with water. With the tank open, slide the cleaning head out of Scooba. Squeeze the cleaning head completely closed over the brush before re-inserting it into its proper location. (page 18) 24 iRobot Scooba Owner's Manual