iRobot Verro 500 Product Manual - Page 10
before removing the cleaner from the pool. - pool cleaning
View all iRobot Verro 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Using Verro (cont...) 8 When Verro has finished cleaning the pool it will stop automatically and the Power Supply light will go OFF. 9 Wait 20 minutes before removing Verro from the pool to allow the motors to cool. Shut off and unplug the Power Supply every time you remove the cleaner from the water. Always remember to turn the Power Supply OFF and unplug it from the power outlet before removing the cleaner from the pool. 10 Unplug the Power Supply from the GFCI outlet. Never leave the Power Supply plugged in when Verro is not in use. 11 Unplug the floating power cord from the Power Supply (turn the locking collar on the plug counter-clockwise to unlock it). Rotate counter-clockwise and pull to unlock 12 Use the floating power cord to pull Verro to the edge of the pool, but use the handle to lift Verro out of the water. Water will drain from Verro as it is lifted. 10 iRobot Verro Owner's Manual