iRobot Verro 500 Product Manual - Page 14
Maintenance and Adjustment - owners manual
View all iRobot Verro 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Maintenance and Adjustment Rinsing Verro iRobot recommends that you rinse Verro with a garden hose after using it. This will extend the life of the plastic and keep your robot looking good for years to come. Storage Store Verro in a dry place out of direct sunlight at a temperature between 50 and 104 degrees Fahrenheit. The Power Supply is water resistant, but not waterproof and may be damaged by rain. Important: Failure to properly store Verro will result in loss of warranty. Changing the Brushes Eventually, Verro's brushes will need to be replaced. It is time to replace them when Verro is riding on its side tracks instead of on the brushes. Please read these instructions carefully before proceeding. If you have any difficulty, please call our customer care representatives at 877.855.8593. They will be happy to provide assistance. 1 Unplug the Power Supply. (Please keep the plug away from contact with water.) Unplug the floating power cord (turn the locking collar counter-clockwise to unlock it) from the Power Supply. 2 Place Verro upside down on a towel and remove the filter bag assembly. (p. 12) 3 Locate the side of the robot with the drive belts. Remove the four screws that hold on the corresponding plate. 14 iRobot Verro Owner's Manual