iRobot Verro 500 Product Manual - Page 9

 Using Verro (cont...) 5 Plug the floating power cord in the Power Supply. Be sure not to force the plug as it will only go in one way. Once the plug is fully seated, turn the locking collar clockwise to lock it. Push and rotate clockwise 6 Ensure the Power Supply at least 12 feet from the pool and plug it into a GFCI outlet. Ensure the electric outlet has been properly grounded. Never leave the Power Supply plugged in when Verro is not in use. Warning: A Ground Fault Current Interrupter (GFCI) must be installed to protect your electric outlet and prevent any possible electric shock. 7 Press the green Power button to start Verro; the light on the Power Supply will illuminate and Verro will start. The length of the cleaning cycle will vary based on pool size. To stop Verro before the end of the cleaning cycle, press the red Power button on the Power Suppy. Floating Power Cord Socket Light Off On LIGHT: Light indicates that robot is ON. ON: Green button turns robot ON. OFF: Red button turns robot OFF. www.irobot.com