2009 BMW 650 Owner's Manual - Page 101

8. Press the controller. The information appears in the HeadUp Display. The settings are stored for the remote control currently in use. Setting brightness The brightness of the display is adapted to the ambient lighting conditions. However, you can change the base setting. With the low beams switched on, the brightness can also be adjusted with the knurled wheel of the instrument lighting. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. Navigation Reference Mobility Communications Entertainment 4. Select "Display settings" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Head-Up Display" is selected and press the controller. 6. Change into the second field from the top. Turn the controller until "Brightness" is selected and press the controller. Controls Driving tips 1 2 Navigation instructions Display > Cruise control > Active cruise control > Leaving lane warning 3 Speed Selecting displays iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Display settings" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Head-Up Display" is selected and press the controller. 6. Change into the second field from the top. Turn the controller until "Head-Up Display" is selected and press the controller. 7. Select desired information of Head-Up Display. 7. Turn the controller until the desired setting is selected. The setting is stored for the remote control currently in use. Notes The visibility of the displays in the Head-Up Display is influenced by: > Sunglasses with certain polarization filters 99 Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG At a glance