2009 BMW 650 Owner's Manual - Page 54

Adjusting 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. Active front head restraints In the event of a rear-end collision of sufficient severity, the active head restraint reduces the distance to the head. Do not use seat covers or head restraint covers that could impede the proper functioning of the active head restraint. Otherwise, there is no assurance that the active head restraint will perform its protective function and it is not possible to take advantage of its injuryreducing potential in the event of a rear-end collision. Have the active head restraints reset after they are triggered in a rear-end collision. Only have this work carried out by a BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Otherwise, this safety equipment will not function properly.< Please contact a BMW center if you wish to have the front head restraints removed and installed.< 6. Select "Central locking" and press the controller. 7. Select "Last seat pos." and press the controller. 8. Select "After unlocking"* or "After door opened". Coupe Height adjustment 9. Press the controller. To cancel the request: Select "Deactivated" and press the controller. Front head restraints A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. Adjust the head restraint so that its center is approximately at ear level. Otherwise there is increased danger of injury in the event of an accident.Only remove the head restraints if no one will be sitting on the seat in question. Reinstall the head restraints before transporting passengers, as otherwise the head restraint cannot provide its protective function.< > To raise: pull the head restraint upward. > To lower: slide the head restraint downward. To reach the lowest position, press the button, refer to arrow 1.< 52 Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG