2009 Buick Enclave Owner's Manual - Page 187

Instrument Panel 3-69 Setting the Clock The vehicle has an analog clock and a digital radio clock. The digital radio clock can be enabled or disabled. the radio clock display is disabled and the OFF display indicates the radio clock display is enabled. Adjusting the Time and Date 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press O, to turn the radio on. 2. Press G to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year). 3. Press the pushbutton located under any one of the labels to be changed. 4. To increase the time or date, do one of the following: • Press the pushbutton below the selected label. • Press ¨SEEK. • If the radio clock display is turned on, the screen displays Radio Clock ON for 10 seconds, then returns to the original clock display menu. Enabling/Disabling the Digital Radio Clock To enable or disable the radio clock display: 1. Press H until the clock and date setting menus appear. 2. Press the pushbutton located under the forward arrow label until the menu for default clock and date settings appear. 3. Press the pushbutton located under the currently displayed status of either ON or OFF to toggle the radio clock display on or off. The ON display indicates • If the radio clock display is turned off, the screen displays Radio Clock OFF for 10 seconds. The menus for clock and date settings are removed, and ON displays as a current status indicating that the clock display can be turned on. If the radio clock and analog clock are not synchronized. Use the procedure below to synchronize both clocks. • Press \ FWD. • Turn f clockwise. 5. To decrease the time or date, do one of the following: • Press ©SEEK. • Press s REV. • Turn f counter-clockwise.