2009 Buick Enclave Owner's Manual - Page 307

Service and Appearance Care 3. Remove the three hex nuts holding the taillamp assembly in place. 4. Pull out the taillamp assembly. 5. Turn the bulb socket counterclockwise and pull it straight out to remove it. 6. Replace the old bulb with a new one. 7. Reverse steps 3 through 5 to reinstall the taillamp assembly. When reinstalling the taillamp assembly, the plastic pin on the taillamp assembly must line up and be inserted correctly into the opening. 2. Turn and pull the license plate lamp forward through the lift gate trim opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 5-35 License Plate Lamp To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 4. Install the new bulb. 5. Reverse steps 1 - 3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp License Plate Lamp Rear Sidemarker Lamp Rear Turn Signal and Taillamps Bulb Number 194 194 7443 (W21/5W) For replacement bulbs not listed here, contact your dealer/retailer.