2014 Buick Encore Owner Manual - Page 111

Instruments and Controls 2. Press and hold SET/CLR while the Set Area display is active. 5-5 Clock The infotainment system controls are used to access the time and date settings through the menu system. See "Using the System" in the infotainment manual. If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone. Setting the 12/24 Hour Format 1. Press the CONFIG button and select Time and Date Settings or press H. 2. Select Set Time Format. 3. Turn the TUNE/MENU knob to highlight the 12 hour or 24 hour display format. 4. Press the TUNE/MENU knob to select display format. Setting the Clock To set the time and date: 1. Press the CONFIG button and then turn the TUNE/MENU knob to select Time and Date Settings or press H. 3. Find the vehicle's current location and zone number on the map. Zones 1 through 15 are available. 4. Use w x to change to the correct zone number. 5. Press SET/CLR to confirm the setting. 2. Select the desired feature. 3. Turn the TUNE/MENU knob to adjust the highlighted number. 4. Press the TUNE/MENU knob to select the next number. 5. To save and return to the Time and Date Settings menu, press / BACK at any time or press the TUNE/MENU knob after adjusting the value. 6. Repeat steps 2-5 for the remaining feature. Power Outlets The accessory power outlets can be used to plug in electrical equipment, such as a cell phone or MP3 player. There is one accessory power outlet on the center stack below the climate control. This outlet is powered when the key is in ON/ RUN or ACC/ACCESSORY, or until the driver door is opened within