2014 Buick Encore Owner Manual - Page 142

6-2 Lighting To return to low beams, push the lever again or pull it toward you and release. A light sensor on top of the instrument panel makes the DRL work, so be sure it is not covered. The DRL system makes the low-beam headlamps come on at a reduced brightness when the following conditions are met: . # (Front Fog Lamps): For vehicles with fog lamps, press to turn the lamps on or off. See Front Fog Lamps on page 6-4. When the lights are on, ; will be lit. See Lamps On Reminder on page 5-20. Headlamp High/ Low-Beam Changer The ignition is in the ON/ RUN mode. The exterior lamp control is in AUTO. The engine is running. This indicator light turns on in the instrument cluster when the high-beam headlamps are on. . . Flash-to-Pass To flash the high beams, pull the turn signal lever all the way toward you. Then release it. Daytime Running Lamps (DRL) 3 (Headlamp High/Low-Beam Changer): Push the turn signal lever away from you and release, to turn the high beams on. Daytime Running Lamps can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada. When the DRL are on, only the low-beam headlamps, at a reduced level of brightness, will be on. The taillamps, sidemarker, instrument panel, and other lamps will not be on. The headlamps automatically change from DRL to the regular headlamps depending on the darkness of the surroundings. The other lamps that come on with the headlamps will also come on.