2014 Buick Encore Owner Manual - Page 219

Vehicle Care If the overheat warning is displayed with no sign of steam: 1. Turn the air conditioning off. 2. Turn the heater on to the highest temperature and to the highest fan speed. Open the windows as necessary. 3. When it is safe to do so, pull off the road, shift to P (Park) or N (Neutral), and let the engine idle. If the engine coolant temperature gauge is no longer in the overheat zone, the vehicle can be driven. Continue to drive the vehicle slowly for about 10 minutes. Keep a safe vehicle distance from the vehicle in front. If the warning does not come back on, continue to drive normally and have the cooling system checked for proper fill and function. If the warning continues, pull over, stop, and park the vehicle right away. If there is no sign of steam, idle the engine for three minutes while parked. If the warning is still displayed, turn off the engine until it cools down. 10-17 Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview on page 10-6 for reservoir location. Washer Fluid What to Use When the vehicle needs windshield washer fluid, be sure to read the manufacturer's instructions before use. If operating the vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing. . { Caution Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint. Do not mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system. When using concentrated washer fluid, follow the manufacturer instructions for adding water. Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid (Continued) . Adding Washer Fluid . .