2014 Buick Encore Owner Manual - Page 225

Vehicle Care 10-23 { Caution Damage may occur if the wiper blades are not in contact with the windshield before turning on the wiper system. 3. Remove the cover. 4. After wiper blade replacement, ensure that the cover hook slides into the slot in the blade assembly. 5. Snap the cover down to secure. To replace the wiper blade: 1. Lift the wiper arm away from the windshield. Rear Wiper Blade Replacement The rear wiper blade and wiper arm have a cover for protection. The cover must be removed before the wiper blade can be replaced. To remove the cover: 2. Press the release button on the top side of the wiper and pull the wiper blade out of the end of the wiper arm. 3. Install the wiper blade connector by sliding into the end of the wiper arm until the button on the wiper blade clicks into place with the wiper arm. 4. Place the wiper arm with the wiper blade in place back on the windshield. 1. Slide a plastic tool under the cover and push upward to unsnap. 2. Slide the cover toward the wiper blade tip to unhook it from the blade assembly. 2. Push the release lever (2) to disengage the hook and push the wiper arm (1) out of the blade assembly (3).