2000 Cadillac Seville Owner's Manual - Page 296

To get the right reading, the fluid should be at normal operating temperature, which is 180_F to 200_F (82_C to 93_C). Get the vehicle warmed up by driving about 15 miles (24 km) when outside temperatures are above 50_F (10_C). If it's colder than 50_F (10_C), you may have to drive longer. Checking the Fluid Level Prepare your vehicle as follows: Then, without shutting off the engine, follow these steps: The transaxle fluid cap is located next to the radiator hose and below the air cleaner assembly on the driver's side of the engine. D Park your vehicle on a level place. Keep the engine running. D With the parking brake applied, place the shift lever in PARK (P). 1. Remove the air cleaner assembly so you can reach the transaxle fluid cap. 2. Turn the cap counterclockwise to remove. Pull out the dipstick and wipe it with a clean rag or paper towel. 3. Push it back in all the way, wait three seconds and then pull it back out again. D With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range. Then, position the shift lever in PARK (P). D Let the engine run at idle for three to five minutes. 6-20