2000 Cadillac Seville Owner's Manual - Page 96

Turn Signal/Multifunction Lever Turn and Lane Change Signals To signal a turn, move the lever on the left side of the steering wheel all the way up or down. The lever returns automatically when the turn is complete. An arrow located on the instrument panel cluster will flash in the direction of the turn or lane change. Arrows that flash rapidly when signaling for a turn or lane change may be caused by a burned-out signal bulb. Other drivers won't see the turn signal. Replace burned-out bulbs to help avoid possible accidents. Check the fuse (see "Fuses and Circuit Breakers" in the Index) and check for burned-out bulbs if the arrow fails to work when signaling a turn. Headlamp High/Low Beam When the low-beam headlamps are on, push the turn signal lever away from you to change the headlamps to high beam. This light on the instrument panel cluster will be on, indicating high-beam usage. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. The lever returns when it is released. If the turn signal is left on, a warning chime will sound and the Driver Information Center (DIC) will display TURN SIGNAL ON (after driving about a mile) to remind you to turn it off. Pull the turn signal lever toward you to return to low-beam headlamps. 2-36