2000 Cadillac Seville Owner's Manual - Page 345

CAUTION: (Continued) hasn't been routed through the seat cushion at all, it won't be there to work for the next passenger. The person sitting in that position could be badly injured. After reinstalling the seat cushion, always check to be sure that the safety belts are properly routed and are not twisted. 1. Buckle the center passenger position safety belt, then route the safety belts through the proper slots in the seat cushion. Don't let the safety belts get twisted. 2. Slide the rear of the cushion up and under the seatback so the rear-locating guides hook into the wire loops on the back frame. 3. With the seat cushion lowered, push rearward and then press down on the seat cushion until the spring locks on both ends engage. 4. Check to make sure the safety belts are properly routed and that no portion of any safety belt is trapped under the seat. Also make sure the seat cushion is secured. Replacement Bulbs Application Headlamps Composite Inner High Beam Outer Low Beam Front Turn Signal Stop/Taillamp Rear Turn Signal Number 9005 HB3 9006 HB4 2357 NA 3057 3057 Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to "Recommended Fluids and Lubricants" in the Maintenance Schedule booklet for more information. Engine Specifications Displacement ...279 cubic inches (4 565 cc) Type ...4.6 L DOHC V8 VIN Engine Code SLS ...Y STS ...9 6-69