2014 Cadillac ATS Owner Manual - Page 197

Infotainment System 3. Say "Delete." The system asks for which phone to delete. 4. Say the name of the phone to delete. Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all available cell phones were paired. This may need to be repeated depending on how many cell phones have been connected. 1. Press g. The system responds "Ready," followed by a tone. 2. Say "Bluetooth." 3. Say "Change phone." . 7-27 Storing and Deleting Phone Numbers The following commands are used to delete and store phone numbers. Store: This command will store a phone number, or a group of numbers as a name tag. Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete : This command is used to delete individual name tags. Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory. Using the "Store" Command 1. Press g. The system responds "Ready," followed by a tone. 2. Say "Store." 3. Say the entire phone number or a group of digits all at once with no pauses, then follow the directions given by the system to save a name tag for this number. Using the "Digit Store" Command If an unwanted number is recognized by the system, say "Correction" at any time to clear the last number. To hear all of the digits recognized by the system, say "Verify" at any time. 1. Press g. The system responds "Ready," followed by a tone. 2. Say "Digit Store." 3. Say each digit, one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Store," and then follow the directions given by the system to save a name tag for this number. If another cell phone is found, the response will be " is now connected." If another cell phone is not found, the original phone remains connected. .