2014 Cadillac ATS Owner Manual - Page 360

10-74 Vehicle Care 5. Connect one end of the red positive (+) cable to the positive (+) terminal on the discharged battery. 6. Connect the other end of the red positive (+) cable to the positive (+) terminal of the good battery. 7. Connect one end of the black negative (-) cable to the negative (-) terminal of the good battery. 8. Connect the other end of the black negative (-) cable to the negative (-) grounding point for the discharged battery. 9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes. 10. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. { Caution If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. Jumper Cable Removal Reverse the sequence exactly when removing the jumper cables. Towing the Vehicle { Caution Incorrectly towing a disabled vehicle may cause damage. The damage would not be covered by the vehicle warranty. Do not lash or hook to the chassis components - including the front and rear subframes, suspension control arms, and links - during towing and recovery of a disabled vehicle, or when securing the vehicle. Use the proper nylon strap harnesses around the tires to secure the vehicle. Have the vehicle towed on a flatbed car carrier. A wheel lift tow truck could damage the vehicle. Consult your dealer or a professional towing service if the disabled vehicle must be towed.