2014 Cadillac ATS Owner Manual - Page 62

3-6 Seats and Restraints 2. Press and release SET, then immediately press and hold "1" until a beep sounds. 3. Repeat Steps 1 and 2 for a second driver using "2." To save positions to the B (Exit) button and Easy Exit features: 1. Adjust the driver seat and outside mirrors to the desired positions for getting out of the vehicle. 2. Press and release SET, then immediately press and hold B until a beep sounds. Manually Recalling Memory Positions If the vehicle is off, or in ON/RUN/ START but not in P (Park) (or parking brake not set if manual transmission), press and hold "1," "2," or B to manually recall the previously stored memory positions. Releasing "1," "2," or B before the stored positions are reached stops the recall. If the vehicle is in ON/RUN/START and in P (Park) (or parking brake set if manual transmission), press and release "1," "2," or B to manually recall the previously stored memory positions. Placing the ignition in OFF before the stored positions are reached stops the recall. If something has blocked the driver seat while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. Automatically Recalling Memory Positions (Auto Memory Recall) The Auto (Automatic) Memory Recall feature automatically recalls the current driver 's previously stored "1" or "2" position when entering the vehicle. Memory Seats If equipped, the "1," "2," SET, and B (Exit) buttons on the driver door are used to manually save and recall memory settings for the driver seat and outside mirrors. Storing Memory Positions To save positions to the "1" and "2" buttons: 1. Adjust the driver seat and outside mirrors to the desired driving positions.