2014 Cadillac ATS Owner Manual - Page 226

9-12 Driving and Operating Warning (Continued) 2. Maximum Vehicle Capacity Weight 3. Size of the Original Equipment Tires 4. Recommended Cold Tire Inflation Pressure vehicle handles. This could cause loss of control and a crash. Overloading can also shorten the life of the vehicle. Tire and Loading Information Label A vehicle-specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). The Tire and Loading Information label shows the number of occupant seating positions (1), and the maximum vehicle capacity weight (2) in kilograms and pounds. The Tire and Loading Information label also shows the tire size of the original equipment tires (3) and the recommended cold tire inflation pressures (4). For more information on tires and inflation see Tires on page 10-40 and Tire Pressure on page 10-47. There is also important loading information on the Certification label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See "Certification Label" later in this section. "Steps for Determining Correct Load Limit- 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. 2. Determine the combined Label Example 1. Number of Occupant Seating Positions weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.