2014 Cadillac ATS Owner Manual - Page 355

Vehicle Care 21. Dispose of the used sealant canister (5) and sealant/air hose (6) assembly at a local dealer or in accordance with local state codes and practices. 22. Replace with a new canister assembly available from your dealer. 23. After temporarily sealing the tire using the tire sealant and compressor kit, take the vehicle to an authorized dealer within 161 km (100 mi) of driving to have the tire repaired or replaced. 3. Pressure Gauge 4. Pressure Deflation Button 5. Tire Sealant Canister 6. Sealant/Air Hose (Clear) 7. Air Only Hose (Black) 8. Power Plug 10-69 9. Canister Release Button (Under Sealant/Air Hose) If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-5. See If a Tire Goes Flat on page 10-62 for other important safety warnings. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10-71. 1. Selector Switch (Sealant/Air or Air Only) 2. On/Off Button 2. Unwrap the air only hose (7) and the power plug (8). Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) To use the air compressor to inflate a tire with air only and not sealant: