2014 Cadillac ATS Owner Manual - Page 365

Vehicle Care Caution (Continued) may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle. To keep the paint finish looking new, keep the vehicle garaged or covered whenever possible. Protecting Exterior Bright Metal Moldings . 10-79 The bright metal moldings on the vehicle are aluminum. To prevent damage always follow these cleaning instructions: . Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals and stripes. Follow instructions under "Washing the Vehicle" previously in this section. Lamp covers are made of plastic, and some have a UV protective coating. Use only lukewarm water, a soft cloth, and mild car washing soap to clean exterior lamps and lenses. Do not clean or wipe them while they are dry. Do not use any of the following on lamp covers: . . Be sure the molding is cool to the touch before applying any cleaning solution. Use a cleaning solution approved for aluminum. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings. Always dilute a concentrated cleaner according to the manufacturer 's instructions. Do not use chrome cleaners. Do not use cleaners that are not intended for automotive use. Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish. . { Caution Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty. . . . Abrasive or caustic agents. Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer.