2014 Cadillac ATS Owner Manual - Page 37

Keys, Doors, and Windows 6. Remove the transmitter from the transmitter pocket and press K or Q on the transmitter. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode. 4. Place the new transmitter in the transmitter pocket. The center console storage area will need to be opened to access the transmitter pocket. 5. Press the ENGINE START/ STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the next transmitter. 2-7 Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak or if there is interference with the signal, the DIC may display a message when you try to start the vehicle. See Key and Lock Messages on page 5-36. To start the vehicle: 1. Open the center console storage area and the storage tray. 2. Place the transmitter in the transmitter pocket. 3. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the ENGINE START/ STOP button. Replace the transmitter battery as soon as possible.