2014 Cadillac ATS Owner Manual - Page 63

Seats and Restraints Depending upon the Auto Memory Recall feature enabled in the vehicle personalization menu, memory "1" or "2" positions are recalled in the following ways: To activate the recall when the ignition is off, and On - Driver Door Open is selected in the vehicle personalization menu: . 3-7 To activate the recall at ignition ON, the transmission must be in P (Park) (or parking brake set if manual transmission) and On - At Ignition On is selected in the vehicle personalization menu: . If the memory position is still not recalling, see your dealer for service. Easy Exit Recall If programmed on in the vehicle personalization menu, the Easy Exit feature automatically moves the driver seat and outside mirrors to the memory positions saved to the B (Exit) button. See "Storing Memory Positions" listed previously. See also Vehicle Personalization on page 5-43. Easy Exit recall automatically activates when one of the following occurs: . Place the ignition in ON/RUN/ START. On vehicles with RKE, press K on the RKE transmitter and open the door. On vehicles with Keyless Access, press the lock/unlock button on the outside driver door handle and open the driver door. The RKE transmitter must be present for the recall to activate. If the driver door is already open, press K on the RKE transmitter to activate the recall. See Vehicle Personalization on page 5-43. To stop recall movement, press one of the memory, power mirror, or power seat controls. If On - At Ignition On is selected in the vehicle personalization menu, placing the ignition in OFF also stops the recall. If something has blocked the driver seat while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by opening the driver door and pressing K on the RKE transmitter. . . The vehicle is turned off and the driver door is opened within a short time. The vehicle is turned off with the driver door open. . If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the