2014 Cadillac CTS Owner Manual - Page 393

Vehicle Care 3. Pressure Gauge 4. Pressure Deflation Button 5. Tire Sealant Canister 6. Sealant/Air Hose (Clear) 7. Air Only Hose (Black) 8. Power Plug 9. Canister Release Button (Under Sealant/Air Hose) When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will help to inflate the tire faster. If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-4. See If a Tire Goes Flat on page 10-85 for other important safety warnings. 10-89 Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit (Coupe) on page 10-94 or Storing the Tire Sealant and Compressor Kit (Wagon) on page 10-95 or Storing the Tire Sealant and Compressor Kit (Sedan) on page 10-96. 2. Unwrap the sealant/air hose (6) and the power plug (8). 3. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4. Remove the valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the sealant/air hose (6) onto the tire valve stem. Turn it clockwise until it is tight. 1. Selector Switch (Sealant/Air or Air Only) 2. On/Off Button