2015 Cadillac SRX Owner Manual - Page 288

Vehicle Care 6. Connect the electrical connector. 7. Install the cap with the down arrow pointing down in the back of the headlamp assembly. 8. For the driver side, reinstall the underhood electrical center cover by latching three clips. 9. For the passenger side, reinstall the air filter/cleaner assembly base by pushing to seat. Verify the base is seated securely, then install the engine air filter/ cleaner assembly. 4. Install the bulb socket in the headlamp assembly. 5. For the driver side, reinstall the underhood electrical center cover by latching the three clips. 6. For the passenger side, reinstall the air filter/cleaner assembly base by pushing to seat. Verify the base is seated securely, then install the engine air filter/ cleaner assembly. 10-29 Turn Signal Lamps To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-14. 2. Remove the push pin (1) on the taillamp cover (2). 3. Remove the taillamp cover from the lamp assembly by pulling rearward from the top to unfasten the snap tabs. Front Turn Signal Lamp (Base and Uplevel) To replace the front turn signal lamp: 1. Remove the turn signal lamp bulb socket from the headlamp assembly. 2. Remove the turn signal lamp bulb from the socket. 3. Replace the bulb in the bulb socket.