2015 Cadillac SRX Owner Manual - Page 291

10-32 Vehicle Care 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. Replacement Bulbs Exterior Lamp Back-up Lamp Daytime Running Lamp 4. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into the lamp assembly. 7. Turn the lamp assembly into the liftgate, engaging the clip side first. Headlamp High-Beam Headlamp Low-Beam License Plate Lamp Turn Signal Front Tail/Turn Signal Rear Bulb Number Hyperclick PH16W 7443 ULL 9005LL H11LL W5WLL 7444NA 7440 For replacement bulbs not listed here, contact your dealer.