2015 Cadillac SRX Owner Manual - Page 290

Vehicle Care 10-31 11. Push the push pin to secure the taillamp cover. License Plate Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-14. 4. Remove the two screws from the taillamp assembly. 5. Pull the taillamp assembly straight back to remove. 6. Disconnect the wiring harness connector from the back-up bulb/ socket assembly. 7. Turn the back-up bulb socket counterclockwise to remove it from the taillamp assembly. 8. Install a new bulb/socket assembly into the taillamp assembly, and turn the bulb/ socket clockwise until it clicks. 9. Reinstall the taillamp assembly and tighten the screws. 10. Reinstall the taillamp cover by snapping it into place. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly toward the right. 3. Turn the lamp assembly down to remove it from the liftgate.