1996 Chevrolet S10 Pickup Owner's Manual - Page 264
1996 Chevrolet S10 Pickup Manual
Page 264 highlights
5. Turn the bulb counterclockwise to remove it. 6. Put the new bulb into the headlamp lens assembly and turn it clockwise untilit is tight. 7. Plug in the electrical connector. 1. Reach under the bumper and behind the parkinghrn signal lamp assembly. 8. Put the headlamp lens assembly back into the vehicle. Install and tighten the screws. 2. Push the tab on the socket, turn the socket counterclockwise and pullit out. Front Turn Signal Lamps If you have fog lamps, the fog lamp bracket must be removed before you can replace the front parkinghum signal lamps. 3. Holding the base of the bulb, pull the bulb straight out of the socket. 4. Push the new bulb into the socket until it clicks. 5. Put the socket back into the parkinghrn signal lamp assembly and turn it clockwise until it locks in place. 6-38