2000 Chevrolet Monte Carlo Owner's Manual - Page 75

4. Put the two halves back together. Make sure the halves are together tightly so water won't get in. 5. Resynchronize and then test the transmitter. NOTICE: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter. Resynchronization To replace your battery: 1. Insert a flat object like a dime into the slot on the back of the transmitter. Gently pry apart the front and back. 2. Gently pry the battery out of the transmitter. Do not use a metal object. 3. Put the new battery into the transmitter as shown on the transmitter (use type CR2032 battery or equivalent). After you have changed the battery in your transmitter, you will need to resynchronize the transmitter. To do this, press the LOCK and UNLOCK buttons on the transmitter at the same time and hold for approximately seven seconds or until one brief horn chirp is heard. 2-9