2000 Chevrolet Monte Carlo Owner's Manual - Page 85
2000 Chevrolet Monte Carlo Manual
Page 85 highlights
ORIG. SET (Return to the Original Settings): This feature allows you to return all feature customization settings back to their original factory settings. To reset: 1. Scroll, using the SEEK up or down arrows, until ORIG. SET appears on the display. 2. Press the PREV or NEXT button to enter the submenu. SET ALL will appear. 3. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk for one second. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. FOB PROG (Remote Keyless Entry Transmitter Programming): This feature allows you to match the remote keyless entry transmitter to your vehicle. To match the transmitter: 1. Scroll, using the SEEK up or down arrows, until FOB PROG appears on the display. 2. Press the PREV or NEXT button to enter the submenu. The current selection will have an asterisk next to it. BEGIN will be displayed. 3. Press the DISP button to start programming. When the message PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned. 4. Repeat Step 3 for each additional transmitter. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. EXIT (Exit Feature Customization Mode): This feature allows you to exit the vehicle customization programming. To exit: D Scroll until EXIT appears on the display. D Press the DISP button to exit programming. A chime will be heard to verify the exit. 2-19