2003 Chevrolet S10 Pickup Owner's Manual - Page 297

When the engine is cold, the coolant level should be at least up to the ADD mark. If it isn't, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system. If there seems to be no leak, start the engine again. The engine cooling fan speed should increase when idle speed is doubled by pushing the accelerator pedal down. If it doesn't, your vehicle needs service. Turn off the engine. Notice: Engine damage from running your engine without coolant isn't covered by your warranty. Heater and radiator hoses, and other engine parts, can be very hot. Don't touch them. If you do, you can be burned. Don't run the engineif there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak fixed before you drive the vehicle. Notice: When adding coolant, it is important that you use onlyDEX-COOL@(silicate-free) coolant. If coolant other than DEX-COOL@is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner at 30,000 miles (50 000 km) or 24 months, whichever occurs first. Damage caused by the use of coolant other than DEX-COOL@ not covered by yournew vehicle is warranty. 5-34