2003 Chevrolet S10 Pickup Owner's Manual - Page 338
2003 Chevrolet S10 Pickup Manual
Page 338 highlights
3. Insert the chisel end of Nofice: To helpavoidvehicle damage, do not drive the wheel wrench, on vehicle the before the cable is restowed. an angle, into the 8. Put the spare tire near the flat tire. hole in the rear bumper. A 4. Be sure the chisel end of the wheel wrench connects into the hoist shaft. 5. Turn the wheel wrench counterclockwise to lower the spare tire. Keep turning the wheel wrench until the spare tire can be pulled out from under the vehicle. 6. When the tire has been completely lowered, tilt the retainer at the end of the cable and pull it through the wheel opening. 7. Pull the tire out from under the vehicle. The tools you'll be using include the jack (A) and wheel wrench (B).Your vehicle may also have an optional hub cap removal tool. If your vehicle is equipped with a compact spare tire, it is stowed underneath the rear of your vehicle. See Compact Spare Tire on page 5-85 for more information about the compact spare. 5-75