2007 Chevrolet Tahoe Owner's Manual - Page 13

Memory Seat, Mirrors, and Pedals Your vehicle may have the memory package. The controls for this feature are located on the driver's door panel, and are used to program and recall memory settings for the driver's seat, outside mirrors, and the adjustable throttle and brake pedal. Not all mirrors will have the ability to save and recall their positions. Not all adjustable throttles and brake pedals will have the ability to save and recall their positions. 2. Press and hold button 1 until two beeps are heard indicating that the position has been stored. A second seating, mirror, and throttle and brake pedal position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in PARK (P). Press and release either button 1 or button 2 corresponding to the desired driving position. The seat, outside mirrors, and adjustable throttle and brake pedals will move to the position previously stored. You will hear a single beep. If you use the remote keyless entry transmitter to enter your vehicle and the remote recall memory feature is on, automatic seat, adjustable mirror, and adjustable pedal movements will occur. See "MEMORY SEAT RECALL" under DIC Vehicle Customization (With DIC Buttons) on page 280 for more information. To save your positions in memory, do the following: 1. Adjust the driver's seat, including the seatback recliner and lumbar, both outside mirrors, and the throttle and brake pedals to a comfortable position. See Outside Power Mirrors on page 170 and Adjustable Throttle and Brake Pedal on page 143 for more information. 13