2008 Chevrolet Malibu Owner's Manual - Page 145

Ending Cruise Control There are two ways to disengage the cruise control: The exterior lamp control has the following four positions: • Step lightly on the brake pedal to disengage the cruise control. 2 (Headlamps): Turn the band to this position to turn on the headlamps, parking lamps, and taillamps. ; (Parking Lamps): Turn the band to this position to turn on the parking lamps and taillamps only. AUTO (Automatic Headlamp System): Turn the band to this position to automatically turn on the Daytime Running Lamps during daytime, and the headlamps, parking lamps, and taillamps at night. • Press the on/off button, to turn off the cruise control. Erasing Speed Memory The cruise control set speed memory is erased when the cruise control or the ignition are turned off. Headlamps P (Off/On): Turn the band to this position to turn on the Automatic Headlamp System. In Canada, this position only works when a vehicle is in the PARK (P) position. To turn on the Automatic Headlamp System, turn the switch to off/on. To turn them off, turn the switch to off/on again. This is a momentary control switch that springs back when released. The Automatic Headlamp System always turns on at the beginning of an ignition cycle. The band on the lever on the outboard side of the steering column operates the exterior lamps. 3-13