2008 Chevrolet Malibu Owner's Manual - Page 161

Remote Start Climate Control Operation If the vehicle has remote start and it is activated, the climate control system heats and cools the inside of the vehicle using the previous system settings before the vehicle was turned off. The climate control knobs will remain active during a remote start. However, the climate control buttons will be inactive until the ignition is turned on by the key. If the fan is off, the climate control system will not operate during remote start. With the automatic climate control system, the climate control displays "RS" in place of the temperature to indicate that remote start is activated. For best performance, turn both the fan and mode knobs to AUTO. If the temperature is cold enough and the mode knob is set to AUTO, the system begins in defrost to clear the windows. See Remote Keyless Entry (RKE) System Operation on page 2-5. Operation Tips • Clear away any ice, snow, or leaves from the air inlets at the base of the windshield that may block the flow of air into the vehicle. • Do not use non-GM approved hood deflectors as they could adversely affect the performance of the system. • Keep the path under the front seats clear of objects to help circulate the air inside of the vehicle more effectively. • When an objectionable odor outside the vehicle is encountered, use the recirculation mode, with the temperature knob at a comfortable setting to prevent the odor from entering the vehicle through the ventilation system. This can be helpful when driving through a long tunnel with poor ventilation. However, extended usage of this mode in cold or cool weather can cause window fogging. Outlet Adjustment Use the lever located in the center of each outlet by moving it either up and down or side-to-side, to change the direction and amount of airflow in the vehicle. 3-29