2009 Chevrolet Aveo Owner's Manual - Page 129
2009 Chevrolet Aveo Manual
Page 129 highlights
The lever is located on the right side of the steering column. The ignition must be turned to ON/RUN to operate the windshield wipers. Move the lever to one of the following positions: HI (High Speed): For steady wiping at high speed. LO (Low Speed): For steady wiping at low speed. INT (Intermittent): Move to this position for a delayed wiping cycle. Turn the band on the windshield wiper toward FAST or SLOW for a shorter or longer delay between wipes. The wiper speed can only be adjusted when the lever is in the INT position. OFF: Turns the windshield wipers off. Windshield Washer To use this feature the ignition must be turned to ON/RUN. Pull the windshield washer/wiper lever toward you to spray washer fluid on the windshield. The spray continues until the lever is released. The wipers will run a few times and either stop or will resume at the speed being used previously. See Windshield Washer Fluid on page 5-33 for information on filling the windshield washer fluid. { CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. Misting Function Move the lever toward INT for a single wiping cycle. Hold it there until the windshield wipers start; then let go. The windshield wipers will stop after one wipe. If more wipes are needed, hold the band toward INT longer. Clear ice and snow from the wiper blades before using them. If they are frozen to the windshield, carefully loosen or thaw them. If the blades become damaged, get new blades or blade inserts. See Windshield Wiper Blade Replacement on page 5-50. Heavy snow or ice can overload the wipers. A circuit breaker stops them until the motor cools. 3-9