2013 Chevrolet Impala Owner Manual - Page 142

6-2 Lighting the battery from being drained. Turn the headlamp control to off and then back to the headlamp on position to make the headlamps stay on for an additional 10 minutes... AUTO (Automatic): Automatically turns on the headlamps at normal brightness, together with the following: ... To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Parking Lamps Instrument Panel Lights Taillamps License Plate Lamps Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low‐beam position, pull the turn signal lever toward you to momentarily switch to high beams. Release the lever to turn the high-beam headlamps off. Parking Lamps Taillamps License Plate Lamps Instrument Panel Lights ; (Parking Lamps): ... Turns on the parking lamps together with the following: Instrument Panel Lights Taillamps License Plate Lamps # (Fog Lamps) (If Equipped): Turns on the fog lamps. See Fog Lamps on page 6‑4. 2 (Headlamps): Turns on the headlamps together with the following lamps listed below. When the headlamps are turned on while the vehicle is on, the headlamps will turn off automatically 10 minutes after the ignition is turned off. When the headlamps are turned on while the vehicle is off, the headlamps will stay on for 10 minutes before automatically turning off to prevent Headlamp High/ Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal lever away from you. This instrument cluster light 3 comes on if the high-beam lamps are turned on while the ignition is in ON/RUN. Daytime Running Lamps (DRL)/Automatic Headlamp System Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada.