2009 Chrysler PT Cruiser Owner Manual - Page 177
2009 Chrysler PT Cruiser Manual
Page 177 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 175 2. Press and hold (approximately 10 seconds) the Compass/Temperature RESET button until the current variance zone number is displayed. 3. Release the RESET button, then press and hold again (approximately 10 seconds), until the direction is displayed with the CAL indicator on continuously in the display. 4. To complete the compass calibration, drive the vehicle in one or more complete 360 degree circles, under 5 mph (8 km/h) in an area free from power lines and large metallic objects, until the CAL indicator turns off. The compass will now function normally. Odometer Display When the appropriate conditions exist, the following odometer messages will display: CRUISE ...Cruise Activated gASCAP ...Fuel Cap Fault noFUSE ...Fuse Fault These messages can be manually turned off by pressing the right reset button (on the instrument cluster). Trip Odometer (ODO) This display shows the distance traveled since the last reset. Press and release the right button (on the instrument cluster) to switch from odometer, to trip A or trip B. Press and hold the right button while the odometer/trip odometer is displayed, to reset. Trip A Shows the total distance traveled for trip A since the last reset. Trip B Shows the total distance traveled for trip B since the last reset. 4