2009 Chrysler PT Cruiser Owner Manual - Page 26
2009 Chrysler PT Cruiser Manual
Page 26 highlights
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Panic Alarm will stay on for three minutes unless you turn it off by pressing the PANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater. NOTE: When you turn off the Panic Alarm by pressing the PANIC button a second time, you may have to be closer to the vehicle due to the Radio Frequency (RF) noises of the system. To Program Additional RKE Transmitters Each vehicle is shipped from the assembly plant with two RKE transmitters programmed only for that vehicle. A total of eight RKE transmitters can be programmed to your vehicle through the use of a currently-programmed RKE transmitter. NOTE: If vehicle is equipped with the optional EVIC in the instrument cluster, the RKE transmitters may also be programmed through the EVIC display. Use the following procedure to program additional RKE transmitters if the vehicle is not equipped with Sentry Key: NOTE: When entering program mode using currentlyprogrammed RKE transmitter, all other programmed transmitters will be erased and you will have to reprogram them for your vehicle. 1. Gather every transmitter that is to be used with the vehicle, including any transmitters that are currently programmed. 2. Enter your vehicle and close all doors. 3. Fasten your seatbelt. (Fastening the seatbelt will cancel any chimes that may confuse you during this programming procedure.) 4. Place the key into the ignition.