2009 Chrysler PT Cruiser Owner Manual - Page 184

182 UNDERSTANDING YOUR INSTRUMENT PANEL Confirmation of Voice Commands - If Equipped When ON is selected, all voice commands from the U-Connect௡ system are confirmed. Press and hold the EVIC button when in this display until ON or OFF appears, to make your selection. Display English or Metric The EVIC, odometer, and navigation system units can be changed between English and METRIC. Press and hold the EVIC button when in this display until US or METRIC appears, to make your selection. Automatic Compass Calibration The compass on your vehicle is self-calibrating, eliminating the need to manually calibrate the compass. When the vehicle is new, the compass may appear erratic and the CAL indicator message will flash in the EVIC until the calibration is complete. A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Calibrate the compass by driving slowly, under 5 mph (8 km/h) in one or more complete circles in a area free from large metallic objects, until the CAL indicator in the EVIC turns off. The compass will now function normally. NOTE: Keep all magnetic objects, such as laptop computers, cell phones and PDA's (anything with a battery) away from the compass sensor which is located in the top of the instrument panel. These devices can interfere with compass accuracy and performance. Manual Compass Calibration If the compass appears to be inaccurate, you may wish to manually calibrate the compass. Prior to calibrating the compass, make sure the proper Compass Variance Value