2005 Dodge Ram 2500 Pickup Owner Manual - Page 19

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Auto Unlock Feature This feature unlocks all the doors of the vehicle when the driver's door is opened first. The following conditions must be met: • The driver's door must be opened first. • The Automatic Door Lock feature must be enabled. • The doors of the vehicle must be locked automatically by the Automatic Door Lock feature. • The vehicle is in P (Park) and the ignition switch is in the Off position. This feature will not operate if any of the conditions above are not met or following has occurred: • Any manual operation of a door lock switch has occurred. Auto Unlock Feature Programming This feature is enabled when your vehicle is shipped from the assembly plant and can be disabled by using the following procedure: Customer Programming sequence to disable or enable: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may be confusing during this programming procedure). 3. Insert the key into the ignition. 4. Within 4 seconds, cycle the key from the OFF position to the ON position four times ending in the ON position (do not start the engine). 2