2005 Dodge Ram 2500 Pickup Owner Manual - Page 24

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Turn the ignition to the ON position ( Do not start the engine ). 5. Press and hold the LOCK button on a programmed (i.e. functional) key fob. 6. Continue to hold the LOCK button, wait at least 4 seconds, but no longer than 10 seconds, then press and hold the UNLOCK button. 7. When a single chime is heard, release both buttons. 8. Turn the ignition to the OFF position or wait 60 seconds. 9. Test the horn chirp feature by pressing the LOCK button on the key fob with the ignition in the OFF position, or the key removed. 10. To reactivate this feature, repeat the above steps. Vehicles will be shipped from the assembly plants with the park lamp flash feature activated. If desired, this feature can be disabled by using the following procedure: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (fastening the seat belt will cancel any chiming that may confuse you during this programming procedure). 3. Place the key into the ignition. 4. Turn the ignition to the ON position ( Do not start the engine ). 5. Press and hold the LOCK button on a programmed (i.e. functional) key fob.