2005 Dodge Ram 2500 Pickup Owner Manual - Page 365
2005 Dodge Ram 2500 Pickup Manual
Page 365 highlights
MAINTAINING YOUR VEHICLE 365 Steering Linkage - Inspection Whenever the vehicle is hoisted, all steering linkage joints should be inspected for evidence of damage. If seals are damaged, parts should be replaced to prevent leakage or contamination of the grease. Lubricate the steering linkage regularly according to the "Maintenance Schedule" in this manual. Half-shaft Constant Velocity Joints All four- wheel- drive 1500 models are equipped with four constant velocity joints. Periodic lubrication of these joints is not required. However, the joint boots should be inspected for external leakage or damage periodically. If external leakage or damage is evident, the joint boot and grease should be replaced immediately. Continued operation could result in failure of the joint due to water and dirt contamination of the grease. This would require complete replacement of the joint assembly. Refer to the Service Manual for the detailed replacement procedure. Front Prop Shaft Lubrication - 2500/3500 (4X4) Models Lubricate the front driveshaft grease fitting at each oil change listed in the appropriate Maintenance Schedule for your vehicle (Schedule "A" and "B"). Use Mopar type MS-6560 (lithium based grease), or equivalent. 7 Front Driveshaft Grease Fitting