2012 Dodge Grand Caravan Owner Manual - Page 591

588 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and Backup Lamps 1. Raise the liftgate. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Remove the tail lamp assembly by removing the two • The PRY location is best closest to the studs while screws from the inboard side. Use a fiber stick or similar dislodging them separately. tool to gently pry the light on the outboard side to disengage the two ball studs. 3. Twist the socket and remove from the lamp assembly. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly. See your authorized dealer.