1996 Ford Bronco Owner's Manual - Page 302
1996 Ford Bronco Manual
Page 302 highlights
Whenever a wheel is removed and then re-installed, always remove any corrosion that may be present on the mounting surface of the wheel and/or the surface of the hub, drum or rotor that contacts the wheel. RWARNING Installing wheels without good metal-to-metal contact at the wheel mounting surface can cause the wheel lug nuts to loosen and could allow the wheel to come off while the vehicle is in motion. Traction-Lok Rear Axle (If equipped) This axle provides added drive away traction on slippery surfaces, particularly when one or more wheels are on a surface with poor traction. RWARNING To avoid injury, never run the engine with one wheel off the ground, such as when changing a tire. Tire Rotation Because your vehicle's front and rear tires perform different jobs, they often wear differently. To make sure your tires wear evenly and last longer, rotate them at the mileage shown in the Maintenance Schedule and Record booklet which came with your vehicle. Rotate the tires according to the following diagram. If you notice that the tires wear unevenly, have them checked. If your light truck has a temporary spare tire, do not include it in the tire rotation pattern. 305