2000 Ford Explorer Sport Owner Guide 1st Printing - Page 268
2000 Ford Explorer Sport Manual
Page 268 highlights
Capacities and specifications Fluid Front axle lubricant Ford Part Name Motorcraft SAE 80W-90 Premium Rear Axle Lubricant Motorcraft SAE 80W-90 Premium Rear Axle Lubricant Motorcraft SAE 75W-140 High Performance Synthetic Rear Axle Lubricant Ultra-Clear Windshield Washer Concentrate Application 4x4 vehicles Capacity 1.7L (1.8 quarts) Rear axle lubricant 5 Refer to Footnote 6 2.9-3.1L (5.5-5.8 pints) Refer to Footnote 7 Windshield washer fluid All 2.6L (2.7 quarts) Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to your scheduled maintenance guide to determine the correct service interval. 2 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford Extended Life Engine Coolant (orange in color). Refer to Adding engine coolant, in the Maintenance and Care chapter. 5 Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. 1 268