2002 Ford F150 Bi-fuel Supplement 1st Printing - Page 26

2002 Ford F150 Manual

Page 26 highlights

Maintenance and care Your vehicle's service pressure will be 24 800 kPa (3 600 psi). Your vehicle's fuel system is rated at 24 800 kPa (3 600 psi); it can be refueled using a P30 or a P36 nozzle only Adapters for other types or styles of dispensing equipment must not be used. When refueling, the engine must be shut off. Use caution when refueling your vehicle. Make sure the engine is turned off and all flammable material is extinguished. Observe all Dispensing Equipment Safety Standards and Operating Procedures. Use this procedure for both "fast-fill" and "slow-fill" CNG refueling. 1. Open the fuel filler door. Refer to the label on the inside of the fuel filler door for the pressure rating of your vehicle's CNG fuel system. • Look for one of these labels (depending on application). 2. Remove the protective cap from the vehicle's CNG fueling point. Remove any debris that may be present. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Your vehicle’s service pressure will be 24 800 kPa (3 600 psi).
Your vehicle’s fuel system is rated at 24 800 kPa (3 600 psi); it can be
refueled using a P30 or a P36 nozzle only
Adapters for other types or styles of dispensing equipment
must not
be
used.
When refueling, the engine
must
be shut off.
Use caution when refueling your vehicle. Make sure the engine is
turned off and all flammable material is extinguished. Observe all
Dispensing Equipment Safety Standards and Operating Procedures.
Use this procedure for both “fast-fill” and “slow-fill” CNG refueling.
1. Open the fuel filler door. Refer to the label on the inside of the fuel
filler door for the pressure rating of your vehicle’s CNG fuel system.
Look for one of these labels
(depending on application).
2. Remove the protective cap from
the vehicle’s CNG fueling point.
Remove any debris that may be
present.
Maintenance and care
26