2005 Ford Explorer Sport Trac Owner Guide 2nd Printing (Spanish) - Page 526
2005 Ford Explorer Sport Trac Manual
Page 526 highlights
Maintenance and Specifications Ford Part Application Capacity Name 4 Motorcraft 4.0L SOHC V6 14.0 quarts Engine coolant Premium Gold engine (13.2L) Engine Coolant (yellow-colored) Front axle Motorcraft SAE 4x4 vehicles 1.8 quarts lubricant 80W-90 (1.7L) Premium Rear Axle Lubricant Motorcraft SAE 8.8 inch 5.5-5.8 pints Rear axle 75W-140 conventional and (2.9-3.1L) lubricant 5 Synthetic Rear Traction-Lok Axle Lubricant axles6 Windshield Motorcraft All 2.7 quarts washer fluid Premium (2.6L) Windshield Washer Concentrate 1 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT MIX MERCON and MERCON V. Refer to the scheduled maintenance information to determine the correct service interval. 2 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 3 Fill to bottom of filler plug hole. 4 Add the coolant type originally equipped in your vehicle. 5 Fill to1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of filler plug hole. 6 Rear axles containing synthetic lubricant are lubricated for life. These lubricants are not to be checked or changed unless a leak is suspected or service is required. The axle lubricant should be changed any time the axle has been submerged in water. Add 4 oz (118 ml.) of Additive Friction Modifier XL-7 or equivalent for complete refill of Traction-Lok axles. 242 Fluid 2005 P207 Explorer Sport Trac (p27) Owners Guide (post-2002-fmt) USA_English (fus)