2006 Ford Expedition Owner Guide 2nd Printing (Spanish) - Page 511

Lights Replacing foglamp bulbs Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. 1. Make sure the headlamp switch is in the OFF position and the engine is not running. 2. Remove the bulb socket from the foglamp by turning counterclockwise. 3. Disconnect the electrical connector from the foglamp bulb. 4. Connect the new foglamp bulb to the electrical connector. 5. Install the bulb socket in the foglamp turning clockwise. Replacing license plate lamp bulb The license plate bulbs are located in the license plate housing assembly on the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch is in the OFF position. 2. Remove the license lamp screw from the assembly. 3. Pull the lamp down and twist the bulb socket counterclockwise. Remove the bulb socket from the lamp. 4. Pull out the old bulb and push in the new bulb. 5. Install the bulb socket in the lamp assembly by turning it clockwise. 6. Install the lamp assembly and secure it with the retaining screw. 103 2006 Expedition (exd) Owners Guide (post-2002-fmt) USA (fus)