2007 Ford F150 Owner Guide 3rd Printing - Page 130

Driver Controls 4. Evenly push down on the bed extender and push the lever in on each side locking it in place. To stow the bed extender, follow steps one through four in reverse order. The bed extender may be used to secure a load of up to 100 lb. (46 kg) on the tailgate. The bed extender should always be kept in the stowed position with the tailgate closed when not in use. Activating bed extender Theft Deterrent Device: The following procedure can be done with the bed extender in the stowed or extended position. 1. Locate the Phillips head screw in the middle of the vertical brace in front of the locking clip. 2. Turn the screw counterclockwise until you hear an audible click. 3. To deactivate, turn the screw clockwise until the locking clip moves freely. To remove the bed extender: 1. Extend the bed extender. 2. Pull the lever on each side of the bed extender to unlock it. Make sure the locking clip screws are loose before removing the bed extender. 3. Press the locking clips below the middle bar and lift the bed extender out of the channels on the "D" pillar. To install the bed extender, follow the removal procedure in reverse order. 130 2007 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus)